download
Programming software update. SERVICE PROCEDURE Engine Control Module Update – Programming (Flashing) Tip: When performing the update programming procedure, ALL DTCs for all systems are erased. DTCs linked to Guided Fault Finding function tests will be lost. Therefore, always address stored DTCs for Customer concerns unrelated to the update programming procedure first. The following “Update – Programming” (flashing) process may overwrite any “TUNED” ECM programming. A “TUNED” ECM is described as any ECM altered so as to perform outside the normal parameters and specifications approved by Volkswagen of America, Inc. If you encounter a vehicle with a “Tuned” ECM, prior to performing the “Update – Programming” (flashing) procedure: Your Dealership should place the vehicle owner on notice in writing, that their ECM was found to have been tuned, and that any damage caused by the tuning of the ECM (including any adverse emissions consequences) will not be covered by Volkswagen of America, Inc. warranties. For any repair requested by the owner under warranty or outside warranty that requires update programming, which will automatically wipe out the “Tuning” program, your Dealership should advise the owner of the above and get Owner’s written consent (see attached Control Module Tuning form) to the update programming procedure. Tool Requirements VAS 5051 or VAS 5052 (with Base CD V.10.01 and the Brand CD V.10.70.00 or higher). “Update – Programming” (flashing) CD 8D0906961A, B, D. Tip: Additional copies of the “Update – Programming” CD (Literature Number 8D0906961A, B, D) may be ordered from the Volkswagen Technical Literature Ordering Center at www.vw.resolve. com , or by calling 1- 800-544-8021 from 8:00 a.m. to 8:00 p.m. EST Monday through Friday. This number can be dialed in both the United States and Canada
2001 Volkswagen Passat GLX 4Motion UPDATE PROGRAMMING FOR CATALYTIC CONVERTER SYSTEM Manual
↧
↧
Trending Articles
More Pages to Explore .....